#
# this config file was automatically generated
# using lirc-0.6.0 on Mon Jun  5 21:06:38 2000
#
# contributed by John K.
#
# brand:             Zenith VCR
# model:             ???
# supported devices: Should work with just about any Zenith VCR.
#
# Note: made this file from a really old TV remote that had VCR
# functions (via switch) on it as well.  This old remote controls a
# fairly new Zenith VCR, so I imagine most all Zenith VCRs/remotes use
# the same protocol.

begin remote

  name  ZENITH_VCR
  bits           14
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  one           692  4908
  zero          692   304
  ptrail        631
  pre_data_bits   1
  pre_data       0x1
  post_data_bits  6
  post_data      0x36
  gap          179228
  repeat_bit      0

      begin codes
          power                    0x0000000000002B6E
          1                        0x0000000000001DB5
          2                        0x0000000000001DAE
          3                        0x0000000000001DAD
          4                        0x0000000000001D76
          5                        0x0000000000001D75
          6                        0x0000000000001D6E
          7                        0x0000000000001D6D
          8                        0x0000000000001BB6
          9                        0x0000000000001BB5
          0                        0x0000000000001DB6
          enter                    0x0000000000001B76
          ch_up                    0x0000000000002BB5
          ch_down                  0x0000000000002DB5
          vol_up                   0x0000000000002BAE
          vol_down                 0x0000000000002DAE
          rew                      0x0000000000002DAD
          play                     0x0000000000002D75
          ff                       0x0000000000002B76
          stop                     0x0000000000002D76
          rev                      0x0000000000002B6D
          fwd                      0x0000000000001B6D
          pause                    0x0000000000001BAD
          mute                     0x0000000000002BAD
      end codes

end remote

