#
# this config file was automatically generated
# using lirc-0.8.0(serial) on Wed Nov  8 00:58:44 2006
#
# contributed by 
#
# brand:                       Viewsat
# model no. of remote control: 
# devices being controlled by this remote: satellite receiver
#

begin remote

  name  Viewsat_SAT
  bits           16
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       9023  4442
  one           578  1642
  zero          578   524
  ptrail        576
  repeat       9023  2214
  pre_data_bits   16
  pre_data       0x4FF
  gap          108161
  toggle_bit      0


      begin codes
          Power                    0xF00F
          Mute                     0x708F
          1                        0x00FF
          2                        0x807F
          3                        0x40BF
          4                        0xC03F
          5                        0x20DF
          6                        0xA05F
          7                        0x609F
          8                        0xE01F
          9                        0x10EF
          0                        0x906F
          Music/TV                 0xD827
          CH-Return                0x58A7
          CH-Up                    0x50AF
          CH-Down                  0xD02F
          Menu                     0xC837
          Exit                     0x8877
          Vol-Up                   0x30CF
          Vol-Down                 0xB04F
          Up                       0x50AF
          Left                     0xB04F
          Right                    0x30CF
          Down                     0xD02F
          OK                       0x9867
          Page-Down                0xB847
          Page-Up                  0x08F7
          Fav                      0x28D7
          Guide                    0x6897
          Info                     0x7887
          Help                     0x42BD
          NTSC/PAL                 0xA857
          Pause                    0xE817
          Audio                    0xF807
          Sat                      0x48B7
          F1                       0x18E7
          F2                       0x02FD
          F3                       0x827D
          F4                       0x38C7
      end codes

end remote


