#
# this config file was automatically generated
# using lirc-0.6.4(ipaq) on Fri Aug 30 02:26:23 2002
#
# contributed by Brian Stanback <brian@stanback.net>
#
# brand: Sony
# model no. of remote control: RM-Y180
# supported devices: Sony Trinitron model no. KV-36FS13
#

begin remote

  name  RM-Y180
  bits           11
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       1833   861
  one           897   786
  zero          429   786
  ptrail        429
  gap          44972
  min_repeat      2
  toggle_bit      0


      begin codes
          pwr                      0x0000000000000548
          mute                     0x0000000000000148
          tv/video                 0x0000000000000528
          picturemode              0x0000000000000138
          sleep                    0x0000000000000368
          mts/sap                  0x0000000000000748
          display                  0x00000000000002E8
          1                        0x0000000000000008
          2                        0x0000000000000408
          3                        0x0000000000000208
          4                        0x0000000000000608
          5                        0x0000000000000108
          6                        0x0000000000000508
          7                        0x0000000000000308
          8                        0x0000000000000708
          9                        0x0000000000000088
          0                        0x0000000000000488
          jump                     0x00000000000006E8
          enter                    0x0000000000000688
          up                       0x0000000000000178
          left                     0x0000000000000168
          down                     0x0000000000000578
          right                    0x0000000000000668
          enter                    0x0000000000000538
          reset                    0x0000000000000348
          menu                     0x0000000000000038
          vol+                     0x0000000000000248
          vol-                     0x0000000000000648
          ch+                      0x0000000000000048
          ch-                      0x0000000000000448
      end codes

end remote
