#
# this config file was automatically generated
# using lirc-0.6.2 on Wed Dec  6 09:44:21 2000
#
# contributed by Claus Misfeldt <misfeldt@frozenfrog.de> 
#
# brand:             SONY
# model:             RM-D57A
# supported devices: DAT-Recorder DTC-57ES
#

begin remote

  name  DAT
  bits           11
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       2446   587
  one          1226   577
  zero          625   577
  ptrail       1228
  gap          45128
  toggle_bit      0


      begin codes
          open                     0x0000000000000023
          start_auto               0x0000000000000053
          start_write              0x0000000000000453
          skip_write               0x0000000000000153
          end_write                0x00000000000000D3
          display                  0x0000000000000693
          start_renumber           0x0000000000000653
          start_erase              0x0000000000000253
          skip_erase               0x0000000000000553
          end_erase                0x00000000000004D3
          1                        0x0000000000000003
          2                        0x0000000000000403
          3                        0x0000000000000203
          4                        0x0000000000000603
          5                        0x0000000000000103
          6                        0x0000000000000503
          7                        0x0000000000000303
          8                        0x0000000000000703
          9                        0x0000000000000083
          0                        0x0000000000000143
          clear                    0x00000000000003C3
          music_scan               0x00000000000001B3
          rms_check                0x00000000000005C3
          rms_enter                0x00000000000006C3
          repeat                   0x0000000000000363
          margin_reset             0x0000000000000393
          skip_play                0x00000000000006D3
          date_rec                 0x00000000000002A3
          date_pres                0x00000000000004A3
          rec                      0x00000000000005E3
          circle                   0x00000000000007E3
          fader                    0x00000000000007D3
          |<<                      0x00000000000000B3
          >>|                      0x00000000000004B3
          stop                     0x00000000000000E3
          play                     0x00000000000002E3
          pause                    0x00000000000004E3
          <<                       0x00000000000006E3
          >>                       0x00000000000001E3
          cd-pause                 0x00000000000004E8
          cd-|<<                   0x0000000000000068
          cd->>|                   0x0000000000000468

# "cd-synchro-stop" is equal to "stop"
# "cd-synchro-start" sends the sequence "pause" | "cd-pause"
# "cd-synchro-stdby" sends the sequence "stop" | "pause"

      end codes

end remote
