#
# this config file was automatically generated
# using lirc-0.6.5(irdeo) on Sun Jul  7 02:35:19 2002
#
# -------
# UPDATED
# this config file was automatically generated
# using lirc-0.6.6(serial) on Sun Dec 22 15:26:55 2002
# -------
#
# VC-MH711 contributed by Michael Mauch
# VC-1594B updated by Tiago S Daitx
#
# brand:                       Sharp
# model no. of remote control: 
# devices being controlled by this remote: VC-MH711 (VCR) / VC-1594B (VCR)
#

begin remote

  name  G0247AJ
  bits           15
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  one           498  1610
  zero          498   565
  ptrail        498
  gap          64077
  min_repeat      1
  toggle_bit      0
  toggle_mask 0x3ff


      begin codes
          1                        0x0000000000006202
          2                        0x0000000000006102
          3                        0x0000000000006302
          4                        0x0000000000006082
          5                        0x0000000000006282
          6                        0x0000000000006182
          7                        0x0000000000006382
          8                        0x0000000000006042
          9                        0x0000000000006242
          0                        0x0000000000006142
          play                     0x0000000000006112
          stop                     0x0000000000006392
          rec                      0x0000000000006052
          pause/still              0x0000000000006292
          ff                       0x0000000000006212
          rew                      0x0000000000006312
          ./..                     0x0000000000006342
          inputselect              0x00000000000060B2
          channel+                 0x0000000000006222
          channel-                 0x0000000000006122
          display                  0x00000000000060C6
          mode_osd/on_screen       0x00000000000062C6
          tv/vcr                   0x0000000000006322
          menu                     0x0000000000006066
          set                      0x0000000000006166
          sv/v+/timer              0x000000000000600E
          clear                    0x0000000000006012
          timer_on/off             0x0000000000006262
          audio_out                0x0000000000006062
          skip_search              0x0000000000006026
          zero_back                0x0000000000006306
          tape_speed/pal-m_ntsc    0x00000000000063E2
          slow                     0x0000000000006252
          slow-/dpss-              0x0000000000006032
          slow+/dpss+              0x00000000000063D2
          key/tamper_proof         0x00000000000062C2
          power                    0x00000000000061A2
          left                     0x00000000000062E6
          right                    0x0000000000006366
          up                       0x0000000000006266
          dn                       0x00000000000060E6
          tv_power                 0x00000000000041A2
          tv_channel+              0x0000000000004222
          tv_channel-              0x00000000000042DD
          tv_vol+                  0x00000000000040A2
          tv_vol-                  0x00000000000042A2
          add/erase                0x00000000000062B6
          100                      0x00000000000063B9
          cancel                   0x0000000000006379
          prog                     0x00000000000062E2
      end codes

end remote



#
# this config file was automatically generated
# using lirc-0.6.5(irdeo) on Sun Jul  7 02:38:42 2002
#
# contributed by 
#
# brand:                       sharptv
# model no. of remote control: G0247AJ
# devices being controlled by this remote: this is the TV section of that RC
#

begin remote

  name  Sharp
  bits            8
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  one           325  1784
  zero          325   730
  ptrail        325
  post_data_bits  7
  post_data      0x22
  gap          64047
  min_repeat      1
  toggle_bit      0
  toggle_mask 0x3ff


      begin codes
          TVOperate                0x0000000000000083
          InputSelect              0x0000000000000086
          TVChUp                   0x0000000000000084
          TVChDn                   0x0000000000000082
          Vol+                     0x0000000000000081
          Vol-                     0x0000000000000085
      end codes

end remote



