#
# this config file was automatically generated
# using lirc-0.8.4a(default) on Sat Jan 10 18:52:23 2009
#
# contributed by Bob Morgan, WB5AOH: wb5aoh at arrl dot net
#
# brand: Sansonic
# model no. of remote control: FT-300A
# devices being controlled by this remote: Sansonic FT-300A
# used template: Falcon Digital: VT-1000
# Sansonic apparently mfg by or for Falcon Digital
# Device is atsc-2-ntsc set-top converter box, circa 2008
# file under Sansonic and/or Falcon
#

begin remote

  name  Sansonic_FT-300A
  bits           16
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       9135  4448
  one           602  1634
  zero          602   534
  ptrail        604
  repeat       9135  2198
  pre_data_bits   16
  pre_data       0xFF
  gap          108000
  toggle_bit_mask 0x0

      begin codes
          mute                     0x30CF
          power                    0x807F
          screen                   0xC837
          sleep                    0x609F
          up/ch+                   0xE01F
          left                     0x708F
          ok                       0xF00F
          right                    0x50AF
          down/ch-                 0xD02F
          info                     0xF807
          cc                       0xBA45
          ant_level                0x3AC5
          chan_scan                0xCA35
          vchip_menu               0x08F7
          vchip_onoff              0x4AB5
          1                        0x728D
          2                        0x52AD
          3                        0x629D
          4                        0xB24D
          5                        0x926D
          6                        0xA25D
          7                        0x32CD
          8                        0x12ED
          9                        0x22DD
          0                        0x10EF
          audio                    0xE817
          language                 0x38C7
      end codes

end remote


