#
# this config file was automatically generated
# using lirc-0.8.1-CVS(default) on Fri Oct 13 23:04:45 2006
#
# contributed by Frank Bennett
#
# brand:                       Pioneer
# model no. of remote control: BR-V3 CATV
# devices being controlled by this remote: Pioneer Digital CATV STB BD-V300
#

begin remote

  name  Pioneer_BR-V3_CATV
  bits           32
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       8511  4281
  one           566  1560
  zero          566   504
  ptrail        566
  gap          89952
  toggle_bit      0


      begin codes
          tv-dengen                0x55AA38C7
          tv-nyuuryoku-kirikae     0x55AAC837
          tv-channel-up            0x55AA08F7
          tv-channel-down          0x55AA8877
          dengen                   0x35CA38C7
          sleep                    0x35CA12ED
          chijou-channel           0x35CACC33
          bs-cs                    0x35CACC33
          catv                     0x35CACC33
          1                        0x35CA807F
          2                        0x35CA40BF
          3                        0x35CAC03F
          4                        0x35CA20DF
          5                        0x35CAA05F
          6                        0x35CA609F
          7                        0x35CAE01F
          8                        0x35CA10EF
          9                        0x35CA906F
          10-0                     0x35CA00FF
          11                       0x35CACC33
          12                       0x35CACC33
          channel-up               0x35CA08F7
          channel-down             0x35CA8877
          ch                       0x35CACC33
          mute                     0x55AA926D
          volume-up                0x55AA50AF
          volume-down              0x55AAD02F
          ff-left                  0x35CAD22D
          ff-right                 0x35CAC837
          ff-down                  0x35CAF20D
          ff-up                    0x35CA728D
          up                       0x35CA1AE5
          down                     0x35CA9A65
          left                     0x35CAEA15
          right                    0x35CA6A95
          kettei                   0x35CA32CD
          guide                    0x35CA0AF5
          shousai                  0x35CA2AD5
          data                     0x35CACC33
          modoru                   0x35CACA35
          aoi                      0x35CACC33
          akai                     0x35CACC33
          midori                   0x35CACC33
          kiiroi                   0x35CACC33
          navi                     0x35CA18E7
          vod                      0x35CACC33
          browser                  0x35CACC33
          okonomi                  0x35CA22DD
          genre-kensaku            0x35CACC33
          channel-hyouji           0x35CA52AD
          channel-ichiran          0x35CADA25
          channel-return           0x35CA3AC5
          gazou                    0x35CACC33
          onsei                    0x35CA7887
          jimaku                   0xF50A8C73
      end codes

end remote


#
# this config file was automatically generated
# using lirc-0.8.1-CVS(default) on Mon Oct 16 07:50:58 2006
#
# contributed by Frank Bennett
#
# brand:                       Pioneer
# model no. of remote control: BR-V3
# devices being controlled by this remote: BD-V300 CATV STB
#
#
# This configuration file works only to send signals to the
# STB using irsend.  It will not work to interpret signals
# sent by the remote.
#
# The BD-V300 remote sends some commands as two 32-bit elements.
# Because the STB expects to see commands repeated once, this means 
# you need to send four codes (A, B, A, B) for these commands.
# The remaining codes (those without a suffix) should be sent
# twice to trigger action by the STB.
#
#
# Here are a few examples using irsend:
#
# Change to terrestrial television mode:
#
#   irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 chijo-A chijo-B chijo-A chijo-B 
#
# Change to cable television mode:
#
#   irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 catv-A catv-B catv-A catv-B
#
# Change to channel 231
#
#   irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 ch-A ch-B ch-A ch-B
#   sleep 1
#   irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 2 2
#   sleep 1
#   irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 3 3
#   sleep 1
#   irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 1 1
#

begin remote

  name  Pioneer_BR_V3
  bits           32
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       8509  4280
  one           566  1560
  zero          566   504
  ptrail        566
  gap          89937
  min_repeat      0
  toggle_bit      0


      begin codes
          dengen                   0x35CA38C7
          chijo-A                  0x35CACC33
          chijo-B                  0xF50ADC23
          bscs-A                   0x35CACC33
          bscs-B                   0xF50ABC43
          catv-A                   0x35CACC33
          catv-B                   0xF50A7C83
          ch-A                     0x35CACC33
          ch-B                     0xF50A3CC3
          1                        0x35CA807F
          2                        0x35CA40BF
          3                        0x35CAC03F
          4                        0x35CA20DF
          5                        0x35CAA05F
          6                        0x35CA609F
          7                        0x35CAE01F
          8                        0x35CA10EF
          9                        0x35CA906F
          10-0                     0x35CA00FF
          11-A                     0x35CACC33
          11-B                     0xF50A9C63
          12-A                     0x35CACC33
          12-B                     0xF50A1CE3
          onsei                    0x35CA7887
          jimaku-A                 0x35CACC33
          jimaku-B                 0xF50A8C73
      end codes

end remote
