# this config file was automatically generated
# using lirc-0.6.3(serial) on Mon Jul 16 03:18:50 2001
#
# contributed by Manuel Bessler <m.bessler@gmx.net>
#
# brand:             Orion
# model:             RC-08
# supported devices: VCR
#

begin remote

  name  orion
  bits           15
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       9065  4433
  one           624  1622
  zero          624   499
  ptrail        624
  repeat       9064  2187
  pre_data_bits   16
  pre_data       0x1DE
  post_data_bits  1
  post_data      0x1
  gap          107861
  toggle_bit      0


      begin codes
          POWER                    0x000000000000641B
          CLOCKCOUNTER             0x000000000000453A
	  MEMORY                   0x0000000000006916
          RESET                    0x0000000000001966
          CH1                      0x000000000000403F
          CH2                      0x000000000000205F
          CH3                      0x000000000000601F
          CH4                      0x000000000000106F
          CH5                      0x000000000000502F
          CH6                      0x000000000000304F
          CH7                      0x000000000000700F
          CH8                      0x0000000000000877
          CH9                      0x0000000000004837
	  CH0                      0x000000000000007F
	  CHDN                     0x0000000000006817
	  CHUP                     0x0000000000002857
	  PROGRAM                  0x0000000000000976
          SET-                     0x000000000000215E
          SET+                     0x000000000000413E
	  CLOCKSET                 0x0000000000001C63
	  CANCEL                   0x0000000000002956
	  ENTER                    0x000000000000512E
#The "hidden keys" are not used on this remote
#But if you cut holes at some locations you can
#press these keys using a screwdriver or long
#fingernails ;-)

#HIDDEN1 is on the same row as POWER and the same 
#column as CH4
          HIDDEN1                  0x000000000000245B
#HIDDEN2 is right next to RESET
          HIDDEN2                  0x0000000000003C43
#HIDDEN3 is right underneath the REC/QTR Label,
#above REW
          HIDDEN3                  0x000000000000146B
#HIDDEN4 is right next to STOP, below FFWD
          HIDDEN4                  0x0000000000007C03
          RECOTR                   0x000000000000542B
	  REW                      0x0000000000004C33
	  PLAY                     0x000000000000344B
	  FFWD                     0x0000000000000C73
	  PAUSESTILL               0x0000000000002C53
	  STOP                     0x000000000000740B
	  AFT                      0x000000000000314E
          PRESET                   0x000000000000017E
          FINETUNEDN               0x000000000000116E
          FINETUNEUP               0x000000000000611E
      end codes

end remote



