# this config file was automatically generated
# using lirc-0.6.6(any) on Tue Apr 20 16:33:34 2004
#
# contributed by Tomas Dvorak (tomas_dvorak at mailcan dot com)
#
# brand: Korting
# model no. of remote control: Unknown 
#                             (0099N1 written on sticker in battery place) 
#
# devices being controlled by this remote: Not known
#
# 40 (5x8) button remote, buttons were pushed left to right, top to bottom.
# Repeat recognition works.
#
# Problems: Each button generates the same sequence at least two times,
# even when pressed for a very short time. I wish lirc had an option
# to discard the first (or second :-) sequence, right now I'm left with
# every button being repeated at least once. Otherwise it works fine.


begin remote

	name		KORTING
	bits		6
	flags		SPACE_ENC
	eps		20
	aeps		0

	header		255	6912
	one		255	6914
	zero		255	4863
	ptrail		255
	gap		14079
	min_repeat	1
	toggle_bit	0

	begin codes
		gramo                    0x0000000000000004
		head                     0x0000000000000024
		s-                       0x0000000000000030
		stp                      0x0000000000000008
		s+                       0x0000000000000028
		1                        0x0000000000000022
		2                        0x0000000000000012
		3                        0x0000000000000032
		4                        0x000000000000000A
		5                        0x000000000000002A
		6                        0x000000000000001A
		7                        0x000000000000003A
		8                        0x0000000000000006
		9                        0x0000000000000026
		0                        0x0000000000000002
		memory                   0x0000000000000039
		u/ch                     0x0000000000000001
		l                        0x0000000000000021
		m                        0x0000000000000011
		f/c-in                   0x0000000000000031
		tuner                    0x000000000000000E
		phono                    0x000000000000002E
		tape                     0x000000000000001E
		aux                      0x000000000000003E
		qt                       0x0000000000000016
		rec                      0x0000000000000014
		<<                       0x000000000000002C
		start                    0x000000000000001C
		>>                       0x000000000000000C
		pause                    0x0000000000000034
		vol+                     0x0000000000000005
		bass+                    0x0000000000000015
		trebble+                 0x000000000000000D
		balr                     0x000000000000001D
		stop                     0x000000000000003C
		vol-                     0x0000000000000025
		bass-                    0x0000000000000035
		trebble-                 0x000000000000002D
		ball                     0x000000000000003D
		off                      0x0000000000000010
	end codes

end remote
