#
# this config file was automatically generated
# using lirc-0.6.3(parallel) on Mon May 28 22:48:24 2001
#
# contributed by  Jordan Hazen <jnh@aug.com>
#
# brand:             JVC
# model:             HR-S7600U SVHS VCR
#
# most of these codes are shared amongst all recent-model JVC VCRs.  These
# represent code set "A"... I couldn't get set "B" to work reliably

begin remote

  name  jvc
  bits            8
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  one           637  1513
  zero          637   441
  ptrail        636
  pre_data_bits   8
  pre_data       0xC2
#  gap          46280
  gap          35000
  min_repeat      1
  toggle_bit      0


      begin codes
          1                        0x0000000000000084
          2                        0x0000000000000044
          3                        0x00000000000000C4
          4                        0x0000000000000024
          5                        0x00000000000000A4
          6                        0x0000000000000064
          7                        0x00000000000000E4
          8                        0x0000000000000014
          9                        0x0000000000000094
          0                        0x00000000000000CC
          enter                    0x000000000000007C
          line                     0x0000000000000076
          up                       0x0000000000000098
          down                     0x0000000000000018
          play                     0x0000000000000030
          pause                    0x00000000000000B0
          stop                     0x00000000000000C0
          rewind                   0x00000000000000E0
          ff                       0x0000000000000060
          fwd                      0x0000000000000028
          back                     0x00000000000000A8
          record                   0x0000000000000033
          skip                     0x0000000000000069
          menu                     0x00000000000000EC
          display                  0x000000000000001C
          reset                    0x000000000000006C
          check                    0x00000000000000BC
          power                    0x00000000000000D0
          eject                    0x0000000000000020
          speed                    0x000000000000008C
          timer                    0x00000000000000AC
          program                  0x0000000000000083
          ok                       0x000000000000003C
          start+                   0x0000000000000013
          start-                   0x0000000000000093
          stop+                    0x0000000000000053
          stop-                    0x00000000000000D3
          date+                    0x0000000000000063
          date-                    0x00000000000000E3
          ch+                      0x0000000000000098
          ch-                      0x0000000000000018
      end codes

end remote
