#
# this config file was automatically generated
# using WinLIRC 0.6.5 (LIRC 0.6.1pre3) on Tue Dec 18 08:01:07 2007
#
# contributed by 
#
# brand:             Dick Smith Electronics (DSE)
# model:             G7659
# supported devices: G7659 standard def STB
#

begin remote

  name  DSE_G7659
  bits           16
  flags SPACE_ENC
  eps            25
  aeps          100

  header       9104  4398
  one           612   498
  zero          612  1641
  ptrail        612
  repeat       9037  2216
  pre_data_bits   16
  pre_data       0xFF00
  gap          39855
  toggle_bit      0


      begin codes
          Power                    0x000000000000AF50
          TV/R                     0x000000000000CF30
          1                        0x0000000000007788
          2/ABC                    0x000000000000B748
          3/DEF                    0x00000000000037C8
          4/GHI                    0x000000000000D728
          5/JKL                    0x00000000000057A8
          6/MNO                    0x0000000000009768
          7/PQRS                   0x00000000000017E8
          8/TUV                    0x000000000000E718
          9/WXYZ                   0x0000000000006798
          0                        0x000000000000F708
          Info                     0x000000000000A758
          EPG                      0x00000000000027D8
          Menu                     0x0000000000005FA0
          Up                       0x0000000000001FE0
          Down                     0x00000000000047B8
          Exit                     0x000000000000C738
          Ch_Up                    0x000000000000FF00
          Ch_Down                  0x0000000000007F80
          Vol-                     0x0000000000003FC0
          Vol+                     0x000000000000BF40
          OK                       0x00000000000007F8
          Fav                      0x0000000000006F90
          Audio                    0x000000000000DF20
          Mute                     0x000000000000EF10
          Pause                    0x0000000000000FF0
          Sys                      0x0000000000002FD0
          UHF                      0x0000000000009F60
          F1                       0x000000000000FD02
          F2                       0x0000000000008F70
          F3                       0x0000000000008778
      end codes

end remote


