# Makefile.in generated by automake 1.18 from Makefile.am. # @configure_input@
# Copyright (C) 1994-2025 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE.
@SET_MAKE@
# -*- Mode: Makefile -*- # # Makefile.am - automake file for Ruby interface to Redland # # Copyright (C) 2000-2012 David Beckett - www.dajobe.org/ # Copyright (C) 2000-2005 University of Bristol - www.bristol.ac.uk/ # # This package is Free Software and part of Redland librdf.org/ # # It is licensed under the following three licenses as alternatives: # 1. GNU Lesser General Public License (LGPL) V2.1 or any newer version # 2. GNU General Public License (GPL) V2 or any newer version # 3. Apache License, V2.0 or any newer version # # You may not use this file except in compliance with at least one of # the above three licenses. # # See LICENSE.html or LICENSE.txt at the top of this package for the # full license terms. #
VPATH = @srcdir@ am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \
} am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ] /g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) am__rm_f = rm -f $(am__rm_f_notfound) am__rm_rf = rm -rf $(am__rm_f_notfound) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH=“$${ZSH_VERSION+.}$(PATH_SEPARATOR)” && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = ruby ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/build/libtool.m4 \
$(top_srcdir)/build/ltoptions.m4 \ $(top_srcdir)/build/ltsugar.m4 \ $(top_srcdir)/build/ltversion.m4 \ $(top_srcdir)/build/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/bindings_config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo “ GEN ” $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ ) (install-info --version) >/dev/null 2>&1;; \ esac
am__vpath_adj_setup = srcdirstrip=`echo “$(srcdir)” | sed 's|.|.|g'`; am__vpath_adj = case $$p in \
$(srcdir) ) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ ) f=$$p;; \ esac;
am__strip_dir = f=`echo $$p | sed -e 's|^. ||'`; am__install_max = 40 am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
{ test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
}
am__installdirs = “$(DESTDIR)$(rubyarchinstalldir)” DATA = $(rubyarchinstall_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
distdir distdir-am
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # not preserved. am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)`
DIST_SUBDIRS = $(SUBDIRS) am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]* ,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPPFLAGS = @CPPFLAGS@ CSCOPE = @CSCOPE@ CTAGS = @CTAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ETAGS = @ETAGS@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ FILECMD = @FILECMD@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBRDF_CPPFLAGS = @LIBRDF_CPPFLAGS@ LIBRDF_LDFLAGS = @LIBRDF_LDFLAGS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ LUA = @LUA@ LUA_CFLAGS = @LUA_CFLAGS@ LUA_LDFLAGS = @LUA_LDFLAGS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MEM = @MEM@ MEM_LIBS = @MEM_LIBS@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PERLINSTALLSITEARCH = @PERLINSTALLSITEARCH@ PERLMAN3DIR = @PERLMAN3DIR@ PERL_MAKEMAKER_ARGS = @PERL_MAKEMAKER_ARGS@ PERL_VERSION = @PERL_VERSION@ PHP = @PHP@ PHP_CFLAGS = @PHP_CFLAGS@ PHP_CONFIG = @PHP_CONFIG@ PHP_EXTENSION_DIR = @PHP_EXTENSION_DIR@ PHP_INCLUDES = @PHP_INCLUDES@ PHP_LDFLAGS = @PHP_LDFLAGS@ PHP_SO_SUFFIX = @PHP_SO_SUFFIX@ PHP_SWIG = @PHP_SWIG@ PHP_VERSION = @PHP_VERSION@ PKG_CONFIG = @PKG_CONFIG@ PYTHON = @PYTHON@ PYTHON_INCLUDES = @PYTHON_INCLUDES@ PYTHON_LDFLAGS = @PYTHON_LDFLAGS@ PYTHON_LIB = @PYTHON_LIB@ PYTHON_LIBEXT = @PYTHON_LIBEXT@ PYTHON_SCRIPT = @PYTHON_SCRIPT@ PYTHON_VERSION = @PYTHON_VERSION@ RANLIB = @RANLIB@ RAPTOR_LDFLAGS = @RAPTOR_LDFLAGS@ RASQAL_LDFLAGS = @RASQAL_LDFLAGS@ REDLAND_CONFIG = @REDLAND_CONFIG@ REDLAND_RUN = @REDLAND_RUN@ REDLAND_SWIG = @REDLAND_SWIG@ REDLAND_VERSION = @REDLAND_VERSION@ RUBY = @RUBY@ RUBY_ARCH_INSTALLDIR = @RUBY_ARCH_INSTALLDIR@ RUBY_CFLAGS = @RUBY_CFLAGS@ RUBY_INCLUDES = @RUBY_INCLUDES@ RUBY_INSTALLDIR = @RUBY_INSTALLDIR@ RUBY_LDFLAGS = @RUBY_LDFLAGS@ RUBY_PACKAGE = @RUBY_PACKAGE@ RUBY_SO_SUFFIX = @RUBY_SO_SUFFIX@ RUBY_VERSION = @RUBY_VERSION@ SD = @SD@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STANDARD_CFLAGS = @STANDARD_CFLAGS@ STRIP = @STRIP@ SWIG = @SWIG@ SWIG_PYTHON_ARGS = @SWIG_PYTHON_ARGS@ TAR = @TAR@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__rm_f_notfound = @am__rm_f_notfound@ am__tar = @am__tar@ am__untar = @am__untar@ am__xargs_n = @am__xargs_n@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ RELEASE = @VERSION_RELEASE@ AM_CPPFLAGS = @CPPFLAGS@ @LIBRDF_CPPFLAGS@ @RUBY_INCLUDES@ AM_CFLAGS = @CFLAGS@ @LIBRDF_CPPFLAGS@ $(MEM) AM_LDFLAGS = @LIBRDF_LDFLAGS@ $(MEM_LIBS) SWIG_OUTPUTS = $(RUBY_PACKAGE)_wrap.c SWIG_CRUFT = RDOC_DIR = rdoc RDOC_STAMP = rdoc-stamp rubyarchinstalldir = @RUBY_ARCH_INSTALLDIR@ rubyarchinstall_DATA = $(RUBY_PACKAGE).$(RUBY_SO_SUFFIX) EXTRA_DIST = \ example.rb test.rb \ redland-pre.i redland-types.i \ $(SWIG_OUTPUTS) \ jquery-1.7.2.js
SUBDIRS = lib test CLEANFILES = \
.db test-out.rdf \
$(RUBY_PACKAGE)_wrap.o $(RUBY_PACKAGE)-stamp \ $(RUBY_PACKAGE).$(RUBY_SO_SUFFIX) $(RUBY_PACKAGE).bundle
MAINTAINERCLEANFILES = $(SWIG_OUTPUTS) $(SWIG_CRUFT) $(RDOC_DIR) $(RDOC_STAMP) RUN = @REDLAND_RUN@ SWIG_OPTS = -I$(srcdir) -DREDLAND_PRE_I -DREDLAND_TYPES_I all: all-recursive
.SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ruby/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign ruby/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
install-rubyarchinstallDATA: $(rubyarchinstall_DATA)
@$(NORMAL_INSTALL) @list='$(rubyarchinstall_DATA)'; test -n "$(rubyarchinstalldir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(rubyarchinstalldir)'"; \ $(MKDIR_P) "$(DESTDIR)$(rubyarchinstalldir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(rubyarchinstalldir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(rubyarchinstalldir)" || exit $$?; \ done
uninstall-rubyarchinstallDATA:
@$(NORMAL_UNINSTALL) @list='$(rubyarchinstall_DATA)'; test -n "$(rubyarchinstalldir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(rubyarchinstalldir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) check-local
check: check-recursive all-am: Makefile $(DATA) installdirs: installdirs-recursive installdirs-am:
for dir in "$(DESTDIR)$(rubyarchinstalldir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done
install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
-$(am__rm_f) $(CLEANFILES)
distclean-generic:
-$(am__rm_f) $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -$(am__rm_f) $(MAINTAINERCLEANFILES)
clean: clean-recursive
clean-am: clean-generic clean-libtool clean-local mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-rubyarchinstallDATA
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-rubyarchinstallDATA
.MAKE: $(am__recursive_targets) check-am install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
check-am check-local clean clean-generic clean-libtool \ clean-local cscopelist-am ctags ctags-am distclean \ distclean-generic distclean-libtool distclean-tags distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am \ install-rubyarchinstallDATA install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am uninstall-rubyarchinstallDATA
.PRECIOUS: Makefile
$(srcdir)/$(RUBY_PACKAGE)_wrap.c: @REDLAND_SWIG@ redland-pre.i redland-types.i
swig -v -ruby $(SWIG_OPTS) -module $(RUBY_PACKAGE) -o $@ @REDLAND_SWIG@
# -UHAVE_CONFIG_H to stop ruby trying to include config.h which won't exist $(RUBY_PACKAGE)_wrap.o: $(srcdir)/$(RUBY_PACKAGE)_wrap.c
$(CC) $(DEFS) $(SWIG_OPTS) -UHAVE_CONFIG_H $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(STANDARD_CFLAGS) -fPIC -DPIC $(RUBY_PACKAGE)_wrap.c -c -o $@
$(RUBY_PACKAGE).$(RUBY_SO_SUFFIX): $(RUBY_PACKAGE)-stamp $(RUBY_PACKAGE)-stamp: $(RUBY_PACKAGE)_wrap.o
$(CC) $(STANDARD_CFLAGS) $(RUBY_PACKAGE)_wrap.o $(AM_LDFLAGS) $(LDFLAGS) $(RUBY_LDFLAGS) -o $(RUBY_PACKAGE).$(RUBY_SO_SUFFIX) touch $(RUBY_PACKAGE)-stamp
check-local: test-ruby
test-ruby: test-simple test-example
test-simple: $(RUBY_PACKAGE).$(RUBY_SO_SUFFIX) $(srcdir)/example.rb
$(RUN)$(RUBY) -I. -Ilib \ $(srcdir)/test.rb file:$(srcdir)/../data/dc.rdf raptor
test-example: $(RUBY_PACKAGE).$(RUBY_SO_SUFFIX) $(srcdir)/example.rb
$(RUN)$(RUBY) -I. -Ilib \ $(srcdir)/example.rb file:$(srcdir)/../data/dc.rdf raptor
docs: $(RDOC_STAMP) $(RDOC_STAMP):
mkdir -p $(RDOC_DIR); \ outdir=`cd $(RDOC_DIR); pwd`; \ rm -rf $$outdir; \ here=`pwd`; \ cd $(srcdir)/lib; \ rdoc --quiet --fmt html --charset 'utf-8' --inline-source --op $$outdir --title "Redland Ruby API RDoc" --exclude convert_owl.rb --exclude constants.rb --exclude convertfoaf.rb && touch $$here/$@ echo "Install JQuery full source replacing rdoc's minimized" cp jquery-1.7.2.js $(RDOC_DIR)/js/jquery.js
clean-local:
rm -rf $(RDOC_DIR) $(RDOC_STAMP)
# Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT:
# Tell GNU make to disable its built-in pattern rules.
- %
-
%,v
- %
-
RCS/%,v
- %
-
RCS/%
- %
-
s.%
- %
-
SCCS/s.%