#
# this config file was automatically generated
# using lirc-0.7.0pre4(serial) on Tue Jan 25 16:14:59 2005
#
# contributed by 
#
# brand:   MC-10 UET-606
# model no. of remote control:  278 on VCR1	all keys function
# devices being controlled by this remote: LINVDR
# Ok on Eject, Menu on A, Back on B, Vol+/Vol- on lower left +/-
# Channel+/Channel- on lower right +/-
#

begin remote

  name  MC-10
  bits           13
  flags RC5|CONST_LENGTH
  eps            30
  aeps          100

  one           930   853
  zero          930   853
  plead         952
  gap          114658
  toggle_bit      2


      begin codes
          1                        0x0000000000001941
          2                        0x0000000000001142
          3                        0x0000000000001943
          4                        0x0000000000001144
          5                        0x0000000000001945
          6                        0x0000000000001146
          7                        0x0000000000001947
          8                        0x0000000000001148
          9                        0x0000000000001949
          0                        0x0000000000001140
          Red                      0x000000000000194E
          Green                    0x000000000000116F
          Yellow                   0x000000000000197B
          Blue                     0x000000000000197C
          Up                       0x0000000000001160
          Down                     0x0000000000001161
          Left                     0x0000000000001951
          Right                    0x0000000000001150
          Ok                       0x000000000000196D
          FastRew                  0x0000000000001172
          Record                   0x0000000000001977
          Play                     0x0000000000001175
          FastFwd                  0x0000000000001974
          Stop                     0x0000000000001176
          Pause                    0x0000000000001970
          Menu                     0x000000000000116C
          Back                     0x000000000000196E
          Channel+                 0x0000000000001154
          Channel-                 0x0000000000001955
          Volume+                  0x000000000000117F
          Volume-                  0x000000000000196B
          Power                    0x000000000000114C
      end codes

end remote

