# this config file was automatically generated
# using lirc-0.6.5(any) on Fri May  3 00:08:14 2002
#
# contributed by Florent Rougon <flo (**AT**) via.ecp.fr>
#
# brand:                                   meliconi
# model name of remote control:            GumBody
# devices being controlled by this remote: TVs and VCRs
#
# Note: this is a universal remote. This file will work if you program
#       your remote with code 101 for the TV and 772 for the VCR.
#       This is a nice combination because these codes yield the same protocol
#       for both the TV buttons and the VCR buttons, therefore you need only
#       one "begin remote..end remote" section in your config file to handle
#       all buttons of your remote.
#
#       When you buy the remote, there is a rectangular block of 43
#       (cols  lines) buttons with no names on them and you have a set of
#       masks that you can stick around the buttons to associate a
#       drawing/inscription to each one of them. I chose the mask that gave me
#       the most obvious drawing/inscription -> button name mapping where
#       "button name" is the name used with lircd for this button.
#       Anyway, even if you don't have the same mask, here is how to identify
#       them: they are listed below as (order is important) txt..color+ (12
#       buttons) and s100..contrast+ (again 12 buttons). The first block
#       corresponds to the buttons taken left to right, then top to bottom;
#       the second block is the same except that the SHIFT button of the
#       remote must be held down while the button of the 43 block is pressed.

begin remote

  name  MELICONI_101_772
  bits           13
  flags RC5|CONST_LENGTH
  eps            30
  aeps          100

  one           895   890
  zero          895   890
  plead         922
  gap          113464
  toggle_bit      2


      begin codes
          tv_off                   0x000000000000100C
          txt                      0x000000000000103C
          10                       0x0000000000001029
          11                       0x0000000000001013
          12                       0x0000000000001012
          tv                       0x000000000000103F
          13                       0x000000000000102D
          14                       0x0000000000001015
          15                       0x0000000000001014
          brightness-              0x000000000000102B
          brightness+              0x000000000000102C
          color-                   0x000000000000102A
          color+                   0x000000000000102E
          s100                     0x000000000000103A
          quiz                     0x000000000000101E
          fa                       0x000000000000101B
          uhr_corner               0x000000000000101A
          corner                   0x0000000000001036
          reverse_corner           0x000000000000100F
          1:16                     0x000000000000101D
          uhr_music                0x000000000000101C
          ra_sl_us                 0x0000000000001028
          m                        0x0000000000001037
          contrast-                0x000000000000102F
          contrast+                0x0000000000001026
          1                        0x0000000000001001
          2                        0x0000000000001002
          3                        0x0000000000001003
          4                        0x0000000000001004
          5                        0x0000000000001005
          6                        0x0000000000001006
          7                        0x0000000000001007
          8                        0x0000000000001008
          9                        0x0000000000001009
          1-                       0x000000000000100A
          0                        0x0000000000001000
          2-                       0x000000000000100B
          menu                     0x000000000000103E
          ok                       0x000000000000100E
          av                       0x0000000000001038
          toggle_sound             0x000000000000100D
          volume-                  0x0000000000001011
          volume+                  0x0000000000001010
          program-                 0x0000000000001021
          program+                 0x0000000000001020
          record                   0x00000000000011B7
          play                     0x00000000000011B5
          vcr_off                  0x000000000000118C
          rewind                   0x00000000000011B2
          stop                     0x00000000000011B6
          pause                    0x00000000000011A9
          fast_forward             0x00000000000011B4
      end codes

end remote

