#
# this config file was automatically generated
# using lirc-0.6.4-CVS(serial) on Wed Aug  8 15:02:44 2001
#
# contributed by Christoph Bartelmus
#
# brand:                       Toshiba
# model no. of remote control: -
# supported devices:           TDP-S2 beamer
#
# The direction button seems to be "stepless" and pressure
# sensitive. I couldn't figure out the system behind it.

begin remote

  name  TOSHIBA_NEC
  bits           16
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       9014  4444
  one           581  1654
  zero          581   536
  ptrail        579
  repeat       9012  3211
  pre_data_bits   16
  pre_data       0xE172
  gap          140158
  toggle_bit      0


      begin codes
          STANDBY                  0x000000000000B04F
          COMPUTER                 0x0000000000009867
          VIDEO                    0x00000000000058A7
          MENU                     0x00000000000040BF
      end codes

end remote

# it's not really RC5

begin remote

  name  TOSHIBA_RC5
  bits           16
  flags RC5|CONST_LENGTH
  eps            30
  aeps          100

  header       1234   590
  one           604   588
  zero          604   588
  gap          24854
  min_repeat      2
  toggle_bit      0


      begin codes
          BACK                     0x000000000000FF7F
          FRONT                    0x0000000000007FFF
	  RELEASE                  0x000000000000FFFF

# some random values, not really usefull

          N                        0x000000000000FFFD
          S                        0x000000000000FF84
          W                        0x00000000000081FF
          E                        0x000000000000FDFF
          NW                       0x00000000000081FA
          SW                       0x00000000000080FF
          SE                       0x000000000000FF80
          NE                       0x000000000000FEFF
          NNE                      0x000000000000FEFE
          NNW                      0x000000000000FFFE
          SSW                      0x0000000000008083
          SSE                      0x000000000000FF80
          SEE                      0x000000000000FCFF
          NEE                      0x000000000000FDFF
          NWW                      0x00000000000080FF
          SWW                      0x00000000000080FF
      end codes

end remote


