# this config file has been tested  using
#  WinLIRC 0.6.5 (LIRC 0.6.1pre3) on Sun Mar 07 14:21:20 2010
#
# contributed by Alan Robinson (http://hcidesign.com)
#
# brand:             Sony
# model:             RM-V310-TV
# supported devices: TV
#
# Note: not all remote 'modes' send IR codes for all the buttons. 
# Using TV, at least with the factory defaults, however, does work.
# Read the Sony docs if you want the vol+ vol- buttons to change your 
# AMPlifier volume.


begin remote

  name  Sony_RM-V310-TV

  bits           12
  flags SPACE_ENC
  eps            30
  aeps          100

  header       2503   486
  one          1310   478
  zero          715   478
  gap          24070
  min_repeat      2
  toggle_bit      0


      begin codes
          BN1                        0x0000000000000010
          BN2                        0x0000000000000810
          BN3                        0x0000000000000410
          BN4                        0x0000000000000C10
          BN5                        0x0000000000000210
          BN6                        0x0000000000000A10
          BN7                        0x0000000000000610
          BN8                        0x0000000000000E10
          BN9                        0x0000000000000110
          BNpower                    0x0000000000000A90
          BNpip                      0x0000000000000DB0
          BNent                      0x0000000000000D10
          BN0                        0x0000000000000910
          BNvol+                     0x0000000000000490
          BNvol-                     0x0000000000000C90
          BNtv_video                 0x0000000000000A50
          BNinfo                     0x00000000000005D0
          BNsleep                    0x00000000000006D0
          BNch+                      0x0000000000000090
          BNch-                      0x0000000000000890
          BNmuting                   0x0000000000000290
          BNrecall                   0x0000000000000DD0
          BNup                       0x00000000000002F0
          BNdown                     0x0000000000000AF0
          BNleft                     0x00000000000002D0
          BNright                    0x0000000000000CD0
          BNmenu                     0x0000000000000070
          BNok                       0x0000000000000A70
          BNplay                     0x0000000000000FB0
          BN<<                       0x00000000000009B0
          BN>>                       0x00000000000001B0
          BNpause                    0x00000000000003B0
          BNstop                     0x00000000000007B0
          BNrec                      0x00000000000005B0
      end codes

end remote


#
# this config file was automatically generated
# using WinLIRC 0.6.5 (LIRC 0.6.1pre3) on Sun Mar 07 14:21:20 2010
#
#
# brand:             Sony
# model:             RM-V310-VCR
# supported devices: 
#

begin remote

  name  Sony_RM-V310-VCR
  bits           12
  flags SPACE_ENC
  eps            30
  aeps          100

  header       2503   486
  one          1311   478
  zero          714   478
  gap          22797
  min_repeat      2
  toggle_bit      0


      begin codes
          power                    0x0000000000000A9A
          play                     0x000000000000059A
          <<                       0x0000000000000D9A
          >>                       0x000000000000039A
          pause                    0x000000000000099A
          stop                     0x000000000000019A
          rec                      0x0000000000000B9A
      end codes

end remote


