#
# this config file was automatically generated
# using lirc-WinLIRC 0.6.1pre2 (LIRC 0.6.1pre2) on Sun Mar 03 01:29:57 2002
#
# contributed by 
#
# brand:             Sony
# model:             RM-PP402
# supported devices: Sony CD Player
#

begin remote

  name  RM
  bits            7
  flags SPACE_ENC
  eps            25
  aeps          100

  header       2422   565
  one           604   565
  zero         1198   565
  ptrail       1198
  post_data_bits  4
  post_data      0x7
  gap          25614
  toggle_bit      0


      begin codes
          cd_play                  0x0000000000000059
          cd_pause                 0x0000000000000031
          cd_stop                  0x0000000000000071
          cd_last                  0x0000000000000079
          cd_next                  0x0000000000000039
          cd_rwnd                  0x0000000000000019
          cd_ffwd                  0x0000000000000069
          cd_disc                  0x0000000000000056
          cd_skip                  0x0000000000000041
          cd_shift                 0x000000000000000D
          cd_enter                 0x0000000000000017
          cd_1                     0x000000000000007F
          cd_2                     0x000000000000003F
          cd_3                     0x000000000000005F
          cd_4                     0x000000000000001F
          cd_5                     0x000000000000006F
          cd_6                     0x000000000000002F
          cd_7                     0x000000000000004F
          cd_8                     0x000000000000000F
          cd_9                     0x0000000000000077
          cd_0                     0x000000000000007D
          cd_off                   0x000000000000002B
      end codes

end remote



#
# this config file was automatically generated
# using lirc-WinLIRC 0.6.1pre2 (LIRC 0.6.1pre2) on Sun Mar 03 01:44:56 2002
#
# contributed by 
#
# brand:             Sony
# model:             RM-PP402
# supported devices: Sony Minidisc deck
#

begin remote

  name  rm
  bits            6
  flags SPACE_ENC
  eps            25
  aeps          100

  header       2429   561
  one          1200   561
  zero          607   561
  ptrail        607
  post_data_bits  5
  post_data      0xF
  gap          23807
  toggle_bit      0


      begin codes
          md_record                0x000000000000002D
          md_play                  0x0000000000000015
          md_stop                  0x0000000000000005
          md_pause                 0x0000000000000025
          md_last                  0x0000000000000001
          md_next                  0x0000000000000021
          md_ffwd                  0x000000000000000D
          md_rwnd                  0x0000000000000035
          md_enter                 0x0000000000000037
          md_shift                 0x0000000000000014
          md_off                   0x000000000000002A
          md_1                     0x0000000000000000
          md_2                     0x0000000000000020
          md_3                     0x0000000000000010
          md_4                     0x0000000000000030
          md_5                     0x0000000000000008
          md_6                     0x0000000000000028
          md_7                     0x0000000000000018
          md_8                     0x0000000000000038
          md_9                     0x0000000000000004
          md_0                     0x0000000000000024
      end codes

end remote



#
# this config file was automatically generated
# using lirc-WinLIRC 0.6.1pre2 (LIRC 0.6.1pre2) on Sat Mar 02 23:37:37 2002
#
# contributed by 
#
# brand:             Sony	
# model:             RM-PP402
# supported devices: Receiver input selection
#

begin remote

  name  rm-pp402
  bits            7
  flags SPACE_ENC
  eps            25
  aeps          100

  header       2452   551
  one          1210   551
  zero          620   551
  ptrail       1210
  post_data_bits  4
  post_data      0x0
  gap          24389
  toggle_bit      0


      begin codes
          sel_dvd                  0x000000000000005F
          sel_tape                 0x0000000000000062
          sel_md                   0x000000000000004B
          sel_video1               0x0000000000000022
          sel_video2               0x000000000000003C
          sel_video3               0x0000000000000021
          sel_tv                   0x000000000000002B
          sel_cd                   0x0000000000000052
          sel_tuner                0x0000000000000042
          sel_phono                0x0000000000000002
          sel_51                   0x0000000000000027
      end codes

end remote



#
# this config file was automatically generated
# using lirc-WinLIRC 0.6.1pre2 (LIRC 0.6.1pre2) on Sat Mar 02 23:44:31 2002
#
# contributed by 
#
# brand:             Sony
# model:             RM-PP402
# supported devices: Receiver Volume selection & sleep mode
# Not recommended to include; receiver internal operations

begin remote

  name  rm
  bits            7
  flags SPACE_ENC
  eps            25
  aeps          100

  header       2455   548
  one           624   548
  zero         1217   548
  ptrail       1217
  post_data_bits  4
  post_data      0xF
  gap          26765
  toggle_bit      0


      begin codes
          rc_vol_inc               0x000000000000005B
          rc_vol_dec               0x000000000000001B
          rc_mute                  0x000000000000006B
          rc_sleep                 0x000000000000007C
      end codes

end remote



#
# this config file was automatically generated
# using lirc-WinLIRC 0.6.1pre2 (LIRC 0.6.1pre2) on Sun Mar 03 01:22:00 2002
#
# contributed by 
#
# brand:             Sony
# model:             RM-PP402
# supported devices: Sony Tape deck
#

begin remote

  name  rm
  bits            6
  flags SPACE_ENC
  eps            30
  aeps          100

  header       2429   564
  one           610   564
  zero         1203   564
  ptrail        610
  post_data_bits  5
  post_data      0x18
  gap          24947
  toggle_bit      0


      begin codes
          tape_play                0x0000000000000029
          tape_backplay            0x000000000000003E
          tape_pause               0x0000000000000019
          tape_stop                0x0000000000000039
          tape_last                0x000000000000003C
          tape_next                0x000000000000001C
          tape_rwnd                0x0000000000000009
          tape_ffwd                0x0000000000000031
          tape_record              0x0000000000000021
          tape_shift               0x0000000000000006
          tape_enter               0x000000000000002B
          tape_1                   0x000000000000003F
          tape_2                   0x000000000000001F
          tape_3                   0x000000000000002F
          tape_4                   0x000000000000000F
          tape_5                   0x0000000000000037
          tape_6                   0x0000000000000017
          tape_7                   0x0000000000000027
          tape_8                   0x0000000000000007
          tape_9                   0x000000000000003B
          tape_0                   0x000000000000001B
      end codes

end remote



#
# this config file was automatically generated
# using lirc-WinLIRC 0.6.1pre2 (LIRC 0.6.1pre2) on Sun Mar 03 02:39:33 2002
#
# contributed by 
#
# brand:             Sony
# model:             RM-PP402
# supported devices: Sony Tuner built into Receiver
# Not recommended for use, as tuner also reacts on commands

begin remote

  name  rm
  bits            7
  flags SPACE_ENC
  eps            25
  aeps          100

  header       2428   565
  one           605   565
  zero         1198   565
  ptrail        605
  post_data_bits  4
  post_data      0x4
  gap          26772
  toggle_bit      0


      begin codes
          tu_1                     0x000000000000007F
          tu_2                     0x000000000000003F
          tu_3                     0x000000000000005F
          tu_4                     0x000000000000001F
          tu_5                     0x000000000000006F
          tu_6                     0x000000000000002F
          tu_7                     0x000000000000004F
          tu_8                     0x000000000000000F
          tu_9                     0x0000000000000077
          tu_0                     0x0000000000000037
          tu_shift                 0x0000000000000019
          tu_enter                 0x000000000000001A
          tu_ch_inc                0x000000000000007B
          tu_ch_dec                0x000000000000003B
      end codes

end remote



#
# this config file was automatically generated
# using lirc-WinLIRC 0.6.1pre2 (LIRC 0.6.1pre2) on Sun Mar 03 02:29:57 2002
#
# contributed by 
#
# brand:             Sony
# model:             RM-PP402
# supported devices: Sony TV
# There are 2 TV off modes: one when in receiver TV mode, one when
# switching remote to full TV control (button flashes red). Last
# one doesn't work with real Sony TV's. 
# Not recommended for use if you have a Sony TV

begin remote

  name  rm
  bits            6
  flags SPACE_ENC
  eps            25
  aeps          100

  header       2428   561
  one           618   561
  zero         1214   561
  ptrail        618
  post_data_bits  5
  post_data      0x17
  gap          27936
  toggle_bit      0


      begin codes
          tv_1                     0x000000000000003F
          tv_2                     0x000000000000001F
          tv_3                     0x000000000000002F
          tv_4                     0x000000000000000F
          tv_5                     0x0000000000000037
          tv_6                     0x0000000000000017
          tv_7                     0x0000000000000027
          tv_8                     0x0000000000000007
          tv_9                     0x000000000000003B
          tv_0                     0x000000000000001B
          tv_shift                 0x0000000000000011
          tv_enter                 0x000000000000000B
          tv_ch_inc                0x000000000000003D
          tv_ch_dec                0x000000000000001D
          tv_off                   0x0000000000000015
          tv_off                   0x0000000000000002
          tv_vol_inc               0x000000000000002D
          tv_vol_dec               0x000000000000000D
          tv_mute                  0x0000000000000035
      end codes

end remote



#
# this config file was automatically generated
# using lirc-WinLIRC 0.6.1pre2 (LIRC 0.6.1pre2) on Sun Mar 03 01:33:46 2002
#
# contributed by 
#
# brand:             Sony
# model:             RM-PP402
# supported devices: Sony VCR menus
#

begin remote

  name  rm
  bits            6
  flags SPACE_ENC
  eps            25
  aeps          100

  header       2404   572
  one          1185   572
  zero          596   572
  ptrail        595
  post_data_bits  5
  post_data      0x1E
  gap          24371
  toggle_bit      0


      begin codes
          vcr_menu                 0x000000000000002C
          vcr_left                 0x0000000000000011
          vcr_up                   0x0000000000000010
          vcr_down                 0x0000000000000030
          vcr_right                0x0000000000000021
          vcr_enter                0x0000000000000022
      end codes

end remote



#
# this config file was automatically generated
# using lirc-WinLIRC 0.6.1pre2 (LIRC 0.6.1pre2) on Sat Mar 02 23:55:17 2002
#
# contributed by 
#
# brand:             Sony
# model:             RM-PP402
# supported devices: Sony VCR Device 1 (VHS) 
#

begin remote

  name  rm
  bits            7
  flags SPACE_ENC
  eps            25
  aeps          100

  header       2439   560
  one           602   560
  zero         1202   560
  ptrail        602
  post_data_bits  4
  post_data      0x2
  gap          24960
  toggle_bit      0


      begin codes
          v1_play                  0x0000000000000053
          v1_pause                 0x0000000000000033
          v1_stop                  0x0000000000000073
          v1_last                  0x000000000000000A
          v1_next                  0x000000000000004A
          v1_rwnd                  0x0000000000000013
          v1_ffwd                  0x0000000000000063
          v1_av                    0x0000000000000055
          v1_enter                 0x0000000000000017
          v1_shift                 0x0000000000000057
          v1_1                     0x000000000000007F
          v1_2                     0x000000000000003F
          v1_3                     0x000000000000005F
          v1_4                     0x000000000000001F
          v1_5                     0x000000000000006F
          v1_6                     0x000000000000002F
          v1_7                     0x000000000000004F
          v1_8                     0x000000000000000F
          v1_9                     0x0000000000000077
          v1_0                     0x0000000000000037
          v1_off                   0x000000000000002B
          v1_chn_inc               0x000000000000007B
          v1_chn_dec               0x000000000000003B
      end codes

end remote



#
# this config file was automatically generated
# using lirc-WinLIRC 0.6.1pre2 (LIRC 0.6.1pre2) on Sun Mar 03 02:19:19 2002
#
# contributed by 
#
# brand:             Sony
# model:             RM-PP402
# supported devices: Sony VCR Device 2 (Beta)
#

begin remote

  name  rm
  bits            7
  flags SPACE_ENC
  eps            25
  aeps          100

  header       2438   559
  one           619   559
  zero         1215   559
  ptrail        619
  post_data_bits  4
  post_data      0xB
  gap          26155
  toggle_bit      0


      begin codes
          v2_play                  0x0000000000000053
          v2_pause                 0x0000000000000033
          v2_stop                  0x0000000000000073
          v2_last                  0x000000000000000A
          v2_next                  0x000000000000004A
          v2_rwnd                  0x0000000000000013
          v2_ffwd                  0x0000000000000063
          v2_av                    0x0000000000000055
          v2_ch_inc                0x000000000000007B
          v2_ch_dec                0x000000000000003B
          v2_shift                 0x0000000000000057
          v2_enter                 0x0000000000000017
          v2_1                     0x000000000000007F
          v2_2                     0x000000000000003F
          v2_3                     0x000000000000005F
          v2_4                     0x000000000000001F
          v2_5                     0x000000000000006F
          v2_6                     0x000000000000002F
          v2_7                     0x000000000000004F
          v2_8                     0x000000000000000F
          v2_9                     0x0000000000000077
          v2_0                     0x0000000000000037
          v2_off                   0x000000000000002B
      end codes

end remote



#
# this config file was automatically generated
# using lirc-WinLIRC 0.6.1pre2 (LIRC 0.6.1pre2) on Sun Mar 03 02:24:29 2002
#
# contributed by 
#
# brand:             Sony
# model:             RM-PP402
# supported devices: Sony Video 3 Device (8mm)
#

begin remote

  name  rm
  bits            7
  flags SPACE_ENC
  eps            25
  aeps          100

  header       2436   561
  one           617   561
  zero         1214   561
  ptrail        617
  post_data_bits  4
  post_data      0x1
  gap          24968
  toggle_bit      0


      begin codes
          v3_play                  0x0000000000000053
          v3_pause                 0x0000000000000033
          v3_stop                  0x0000000000000073
          v3_last                  0x000000000000000A
          v3_next                  0x000000000000004A
          v3_rwnd                  0x0000000000000013
          v3_ffwd                  0x0000000000000063
          v3_av                    0x0000000000000055
          v3_ch_inc                0x000000000000007B
          v3_cd_dec                0x000000000000003B
          v3_shift                 0x0000000000000057
          v3_enter                 0x0000000000000017
          v3_1                     0x000000000000007F
          v3_2                     0x000000000000003F
          v3_3                     0x000000000000005F
          v3_4                     0x000000000000001F
          v3_5                     0x000000000000006F
          v3_6                     0x000000000000002F
          v3_7                     0x000000000000004F
          v3_8                     0x000000000000000F
          v3_9                     0x0000000000000077
          v3_0                     0x0000000000000037
          v3_off                   0x000000000000002B
      end codes

end remote


#
# this config file was automatically generated
# using lirc-WinLIRC 0.6.1pre2 (LIRC 0.6.1pre2) on Sat Mar 02 23:41:30 2002
#
# contributed by 
#
# brand:             Sony
# model:             RM-PP402
# supported devices: Receiver sound mode selection
# Not recommended to include; receiver internal operations

begin remote

  name  rm
  bits            6
  flags SPACE_ENC
  eps            25
  aeps          100

  header       2444   545
  one           627   545
  zero         1216   545
  ptrail       1216
  post_data_bits  8
  post_data      0x7B
  gap          20812
  toggle_bit      0


      begin codes
          rc_mode_inc              0x0000000000000022
          rc_mode_dec              0x0000000000000002
          rc_mode_afd              0x0000000000000007
          rc_mode_2ch              0x000000000000001F
      end codes

end remote


#
# this config file was automatically generated
# using lirc-WinLIRC 0.6.1pre2 (LIRC 0.6.1pre2) on Sun Mar 03 01:48:58 2002
#
# contributed by 
#
# brand:             Sony
# model:             RM-PP402
# supported devices: Sony sat receiver menu
#

begin remote

  name  rm
  bits            7
  flags SPACE_ENC
  eps            25
  aeps          100

  header       2414   564
  one           612   564
  zero         1213   564
  ptrail       1213
  post_data_bits  7
  post_data      0x9
  gap          18456
  toggle_bit      0


      begin codes
          sat_menu                 0x0000000000000071
          sat_satguide             0x0000000000000044
          sat_exit                 0x000000000000001C
          sat_left                 0x0000000000000028
          sat_up                   0x0000000000000058
          sat_down                 0x0000000000000018
          sat_right                0x0000000000000068
          sat_enter                0x0000000000000048
          sat_exit                 0x000000000000001C
      end codes

end remote


# this config file was automatically generated
# using lirc-WinLIRC 0.6.1pre2 (LIRC 0.6.1pre2) on Thu Feb 28 22:15:12 2002
#
# contributed by 
#
# brand:             Sony
# model:             RM-PP402
# supported devices: Sony DVD Players
#

begin remote

  name  RM-PP402
  bits            7
  flags SPACE_ENC
  eps            30
  aeps          100

  header       2422   555
  one           618   555
  zero         1213   555
  ptrail        618
  post_data_bits  12
  post_data      0xA36
  gap          13612
  toggle_bit      0


      begin codes
          dv_play                  0x0000000000000059
          dv_stop                  0x0000000000000071
          dv_pause                 0x0000000000000031
          dv_ffwd                  0x0000000000000069
          dv_rwnd                  0x0000000000000019
          dv_next                  0x0000000000000039
          dv_last                  0x0000000000000079
          dv_1                     0x000000000000007F
          dv_2                     0x000000000000003F
          dv_3                     0x000000000000005F
          dv_4                     0x000000000000001F
          dv_5                     0x000000000000006F
          dv_6                     0x000000000000002F
          dv_7                     0x000000000000004F
          dv_8                     0x000000000000000F
          dv_9                     0x0000000000000077
          dv_0                     0x0000000000000037
          dv_enter                 0x0000000000000017
          dv_skip                  0x0000000000000001
          dv_off                   0x000000000000002B
          dv_menu                  0x0000000000000013
          dv_title                 0x0000000000000053
          dv_left                  0x0000000000000010
          dv_up                    0x0000000000000030
          dv_right                 0x0000000000000060
          dv_down                  0x0000000000000050
          dv_exit                  0x0000000000000047
      end codes

end remote
