#
# this config file was automatically generated
# using lirc-0.7.1pre2(any) on Sun Oct 30 12:48:03 2005
#
# contributed by 
#
# brand:                       Sanyo
# model no. of remote control: B13509
# devices being controlled by this remote: vcr (?)
#

begin remote

  name  Sanyo-B13509
  bits           16
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       9044  4494
  one           572  1679
  zero          572   554
  ptrail        564
  repeat       9038  2254
  pre_data_bits   16
  pre_data       0x8C73
  gap          108088
  toggle_bit      0


      begin codes
          power                    0xDA25
          preset                   0x7986
          clock                    0x6A95
          1                        0x20DF
          2                        0xA05F
          3                        0x609F
          4                        0xE01F
          5                        0x30CF
          6                        0xB04F
          7                        0x708F
          8                        0xF00F
          9                        0x38C7
          0                        0xB847
          ch+                      0x807F
          ch-                      0x40BF
          clear                    0x52AD
          ok                       0xD22D
          prog                     0x629D
          vps/pdc                  0xF20D
          input                    0x7887
          audio                    0xC03F
          slow                     0x58A7
          rew                      0x48B7
          play                     0x28D7
          ff                       0xC837
          rec                      0xA857
          stop                     0x08F7
          pause/still              0x8877
          sp/lp                    0x7A85
          memory                   0xC23D
          reset                    0x22DD
          index                    0x9867
      end codes

end remote


