#
# this config file was automatically generated
# using lirc-0.8.2(default) on Tue Jul 17 20:24:17 2007
#
# contributed by 
#
# brand:                       Sanyo
# model no. of remote control: B12628
# devices being controlled by this remote:
#

begin remote

  name  Sanyo_B12628
  bits           16
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       9077  4428
  one           636  1614
  zero          636   488
  ptrail        635
  repeat       9078  2175
  pre_data_bits   16
  pre_data       0x8C73
  gap          107994
  toggle_bit_mask 0x0

      begin codes
          PWR                      0xDA25
          INDEX                    0x9867
          PLAY                     0x28D7
          REW                      0x48B7
          FF                       0xC837
          STOP                     0x08F7
          RE                       0xA857
          STILL                    0x8877
          RESET                    0x22DD
          MEM                      0xC23D
          MENU                     0x53AC
          SHOWVIEW                 0x31CE
          VPS                      0xF20D
          TYPE                     0x629D
          PLUS                     0x807F
          MINUS                    0x40BF
          PRESET                   0x7986
          CLR                      0x52AD
          1                        0x20DF
          2                        0xA05F
          3                        0x609F
          4                        0xE01F
          5                        0x30CF
          6                        0xB04F
          7                        0x708F
          8                        0xF00F
          9                        0x38C7
          0                        0xB847
          INPUT                    0x7887
          OK                       0xD22D
      end codes

end remote


