#
# this config file was automatically generated
# using lirc-0.6.3pre3 on Fri Apr 27 17:21:19 2001
#
# contributed by Gerald Faulhaber, gdsiggi@gmx.de
#
# the key =>1 (for VideoText) and -/-- seam to have the same code
# didnt detect any differences. 
# If you press --/- (or =>1) the code is different, it switches
# between 2 codes.
#
#
# brand:             samsung
# model:             TM-33
# supported devices: TV
#

begin remote

  name  test
  bits            6
  flags RC5|CONST_LENGTH
  eps            30
  aeps          100

  one           831   848
  zero          831   848
  plead         816
  pre_data_bits   7
  pre_data       0x40
  gap          107652
  toggle_bit      2


      begin codes
          power                    0x000000000000000C
          mute                     0x000000000000000D
          1                        0x0000000000000001
          2                        0x0000000000000002
          3                        0x0000000000000003
          4                        0x0000000000000004
          5                        0x0000000000000005
          6                        0x0000000000000006
          7                        0x0000000000000007
          8                        0x0000000000000008
          9                        0x0000000000000009
          -/--                     0x000000000000000A
          0                        0x0000000000000000
          [+]                      0x000000000000000F
          volume+                  0x0000000000000010
          volume-                  0x0000000000000011
          prog+                    0x0000000000000020
          prog-                    0x0000000000000021
          >>                       0x000000000000001E
          >[]<                     0x000000000000000E
          []                       0x000000000000003F
          AV                       0x0000000000000038
          time                     0x0000000000000026
          colour+                  0x0000000000000014
          colour-                  0x0000000000000015
          brightness+              0x0000000000000012
          brightness-              0x0000000000000013
          contrast+                0x000000000000001C
          contrast-                0x000000000000001D
          =?                       0x000000000000002C
          1<=                      0x000000000000000B
#          =>1                      0x000000000000000A
          =^                       0x0000000000000029
          =x                       0x000000000000002D
          =                       0x000000000000002A
          =                       0x000000000000002B
          =                        0x000000000000003C
          /=                       0x000000000000002E
      end codes

end remote




