#
# this config file was automatically generated
# using lirc-0.6.3pre3 on Wed Jan 24 13:53:01 2001
#
# contributed by 
#
# brand:             Philips
# model:             RC8861
# supported devices: Universial remote
#

begin remote

  name  RC8861
  bits           11
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       2368   620
  one          1180   610
  zero          587   610
  ptrail        586
  gap          44873
  toggle_bit      0


      begin codes
          power                    0x0000000000000548
          mute                     0x0000000000000148
          vol+                     0x0000000000000248
          vol-                     0x0000000000000648
          ch+                      0x0000000000000048
          ch-                      0x0000000000000448
          one                      0x0000000000000008
          two                      0x0000000000000408
          three                    0x0000000000000208
          four                     0x0000000000000608
          five                     0x0000000000000108
          six                      0x0000000000000508
          seven                    0x0000000000000308
          eight                    0x0000000000000708
          nine                     0x0000000000000088
          zero                     0x0000000000000488
          -/--                     0x0000000000000188
          shift_mute               0x0000000000000018
          shift_ch+                0x00000000000003C8
          shift_ch-                0x0000000000000448
          shift_ch-                0x00000000000007C8
          shift_vol+               0x00000000000002C8
          shift_vol-               0x00000000000006C8
          shift_seven              0x00000000000007E8
          shift_eight              0x00000000000006A8
          shift_nine               0x00000000000000E8
          shift_-/--               0x0000000000000588
      end codes

end remote
