#
# this config file was automatically generated
# using lirc-0.8.3(default) on Wed Apr  1 23:12:45 2009
#
# contributed by Chris Pimlott <lirc|chris.pimlott.net>
#
# brand:                       Philips
# model no. of remote control: RC2143601
# devices being controlled by this remote: Philips 47PFL7603D LCD TV
#

begin remote

  name  Philips_RC2143601
  bits           13
  flags RC5|CONST_LENGTH
  eps            30
  aeps          100

  one           892   879
  zero          892   879
  plead         878
  gap          112849
  toggle_bit_mask 0x800

      begin codes

# physical button command codes

          power                    0x100C

          source                   0x1038

          ambilight_power          0x10E3
          ambilight_mode           0x10E4
          fav                      0x0039
          format                   0x003E

          red                      0x002B
          green                    0x002C
          yellow                   0x002D
          blue                     0x002E

          mode                     0x10CA
          option                   0x0037

          ok                       0x0017
          up                       0x0010
          down                     0x0011
          right                    0x0016
          left                     0x0015

          menu                     0x0012
          info                     0x100F

          vol+                     0x1010
          vol-                     0x1011

          mute                     0x100D

          chan+                    0x1020
          chan-                    0x1021

          1                        0x1001
          2                        0x1002
          3                        0x1003
          4                        0x1004
          5                        0x1005
          6                        0x1006
          7                        0x1007
          8                        0x1008
          9                        0x1009
	  prev                     0x1022
          0                        0x1000
          .                        0x00F8


# discrete codes
# these do not correspond to actual buttons but are useful
# for remote macro programming

	POWER_ON		0x103f
	POWER_OFF		0x103d
	INPUT_HDMI1		0x10f9
	INPUT_HDMI2		0x00fb
	INPUT_HDMI3		0x10c6
	INPUT_HDMI4		0x10c7
	INPUT_EXT1		0x10c4
	INPUT_EXT2		0x1039
	INPUT_EXT3		0x10f8
	INPUT_SIDE		0x10fa

	ZOOM_AUTO		0x10fd
	ZOOM_4:3		0x00f5
	ZOOM_WIDE		0x00f4


      end codes

end remote


