# this config file was automatically generated
# using lirc-0.8.3pre1(default) on Fri Jan  4 16:44:30 2008
#
# contributed by Wojciech Porczyk <woju|staszic.waw.pl>
# original file: http://wojciech.porczyk.eu/pub/lirc/remotes/EUR511224/lircd.conf
#
# brand:                                    Panasonic
# model no. of remote control:              EUR511224
# devices being controlled by this remote:  TV, VCR, DVD
#

begin remote

    name                    Panasonic_EUR511224.TV
    bits                    24
    flags                   SPACE_ENC
    eps                     30
    aeps                    100

    header                  3595    1642
    one                     539     1206
    zero                    539     332
    ptrail                  537
    pre_data_bits           24
    pre_data                0x400401
    gap                     75037
    toggle_bit_mask         0x0

    begin codes

# top
        POWER               0x00BCBD
        MUTE                0x004C4D
        UP                  0x002C2D
        DOWN                0x00ACAD
        VOLUME_UP           0x000405
        VOLUME_DOWN         0x008485
        DISPLAY             0x009C9D
        TV/AV               0x00A0A1

# teletext colors
        RED                 0x000E0F
        GREEN               0x008E8F
        YELLOW              0x004E4F
        BLUE                0x00CECF

# over numpad
        FP                  0x80A021
        INDEX               0x801091
        HOLD                0x809011

# numeric pad
        1                   0x000809
        2                   0x008889
        3                   0x004849
        4                   0x00C8C9
        5                   0x002829
        6                   0x00A8A9
        7                   0x006869
        8                   0x00E8E9
        9                   0x001819
        0                   0x009899
        --                  0x00DCDD
        C                   0x005C5D

# left panel
        PICTURE             0x006061
        SOUND               0x00E0E1
        SETUP               0x004A4B
        TV/TEXT             0x80C041
        DIRECTREC           0x909100
        SURROUND            0x008C8D
        ASPECT              0x207B5A
        MULTIWINDOW         0x006766

# under the cover in the bottom
        N                   0x003031
        STR                 0x00ABAA
        HELP                0x003534

    end codes

end remote

# PLAY, STOP, FORWARD and REWIND buttons are located under numpad
# POWER, REC, PAUSE and PROGRAMME_{UP,DOWN} are under the lid
#
# note that REC, PAUSE and PROGRAMME_{UP,DOWN} work only in VCR mode

begin remote

    name                    Panasonic_EUR511224.VCR
    bits                    16
    flags                   SPACE_ENC
    eps                     30
    aeps                    100

    header                  3595    1642
    one                     539     1206
    zero                    539     332
    ptrail                  537
    pre_data_bits           32
    pre_data                0x40040900
    gap                     75037
    toggle_bit_mask         0x0

    begin codes

        POWER               0xBCB5
        REC                 0x1019
        PAUSE               0x6069
        UP                  0x2C25
        DOWN                0xACA5

        PLAY                0x5059
        STOP                0x0009
        FORWARD             0xC0C9
        REWIND              0x4049
    
    end codes

end remote

begin remote

    name                    Panasonic_EUR511224.DVD
    bits                    16
    flags                   SPACE_ENC
    eps                     30
    aeps                    100

    header                  3595    1642
    one                     539     1206
    zero                    539     332
    ptrail                  537
    pre_data_bits           32
    pre_data                0x40040D00
    gap                     75037
    toggle_bit_mask         0x0

    begin codes

        POWER               0xBCB1

        PLAY                0x505D
        STOP                0x000D
        FORWARD             0x525F
        REWIND              0x929F
# does not work: REC, PAUSE, PROGRAMME_{UP,DOWN}

    end codes

end remote

