#
# This config file has been automatically converted from a device file
# found in the 06/26/00 release of the Windows Slink-e software
# package.
#
# Many thanks to Colby Boles of Nirvis Systems Inc. for allowing us to
# use these files.
#
# The original filename was: "nec rc-6010 multisync proj.cde"
#
# The original description for this device was:
#
# nec rc-6010 multisync proj. moni
#


begin remote

  name  RC-6010
  bits           32
  flags SPACE_ENC
  eps            20
  aeps          200

  header       8800  4400
  one           550  1650
  zero          550   550
  ptrail        550
  repeat       8800  2200
  gap          38500
  toggle_bit      0

  frequency    38000

      begin codes
          POWER_ON                 0x0000000018EF10EF
          POWER_OFF                0x0000000018EF28D7
          OPERATE                  0x0000000018EF609F
          PIC_MUTE                 0x0000000018EFE21D
          SOUND_MUTE               0x0000000018EFA25D
          1                        0x0000000018EF18E7
          2                        0x0000000018EF9867
          3                        0x0000000018EF58A7
          4                        0x0000000018EFD827
          5                        0x0000000018EF38C7
          6                        0x0000000018EFB847
          7                        0x0000000018EF7887
          8                        0x0000000018EFF807
          9                        0x0000000018EF02FD
          10                       0x0000000018EF827D
          R                        0x0000000018EF00FF
          B                        0x0000000018EF40BF
          UP                       0x0000000018EF3AC5
          DOWN                     0x0000000018EFBA45
          LEFT                     0x0000000018EFFA05
          RIGHT                    0x0000000018EF7A85
          NORMAL                   0x0000000018EFC23D
          ENTER                    0x0000000018EFE817
          'END'                    0x0000000018EF906F
      end codes

end remote
