#
# this config file was automatically generated
# using lirc-0.8.1(default) on Thu Nov  1 18:07:22 2007
#
# contributed by alfsch
# muvid.conf
# brand: M3 Electronic                       
# model no. of remote control: 
# devices being controlled by this remote: muvid DVD-209
#

begin remote

  name Muvid_DVD-209
  bits           16
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       9075  4444
  one           617  1632
  zero          617   507
  ptrail        618
  repeat       9079  2194
  pre_data_bits   16
  pre_data       0xFF
  gap          108015
  toggle_bit      0


      begin codes
          play                     0xD827
          stop                     0x0AF5
          next                     0xE817
          prev                     0xF00F
          1                        0x50AF
          2                        0x906F
          3                        0x10EF
          4                        0x48B7
          5                        0x8877
          6                        0x08F7
          7                        0x708F
          8                        0xB04F
          9                        0x30CF
          0                        0xA857
          menu                     0x28D7
          setup                    0x58A7
          vol+                     0xAA55
          vol-                     0x728D
          repeat                   0x32CD
          v-mode                   0xC23D
          hdres                    0x629D
          power                    0x40BF
          open                     0x9A65
          left                     0x7887
          right                    0x38C7
          up                       0xB847
          down                     0xC837
          enter                    0xD02F
          rev                      0x926D
          fwd                      0x12ED
      end codes

end remote


