#
# this config file was automatically generated
# using lirc-0.8.0(serial) on Fri Feb 10 03:49:29 2006
#
# contributed by 
#
# brand:  KENWOOD
# model no. of remote control:  RC-P2030
# devices being controlled by this remote:
#

begin remote

  name Kenwood_RC-P2030
  bits           16
  flags SPACE_ENC
  eps            30
  aeps          100

  header       9122  4426
  one           662  1592
  zero          662   464
  ptrail        662
  repeat       9119  2157
  pre_data_bits   16
  pre_data       0x6D92
  gap          39886
  repeat_gap   96494
  toggle_bit      0


      begin codes
          stop                     0x8877
          rew                      0x28D7
          fwd                      0xA857
          play                     0xC837
          prev                     0x6897
          next                     0xE817
          vol_up                   0x926D
          vol_down                 0x12ED
          time_display             0x18E7
          repeat                   0x9867
          check                    0xD827
          clear                    0x58A7
          p-mode                   0xF807
          1                        0x807F
          2                        0x40BF
          3                        0xC03F
          4                        0x20DF
          5                        0xA05F
          6                        0x609F
          7                        0xE01F
          8                        0x10EF
          9                        0x906F
          0                        0x00FF
          10                       0x50AF
      end codes

end remote


