#
# this config file was automatically generated
# using lirc-0.6.5(sir) on Thu Feb 28 20:06:49 2002
#
# contributed by 
#
# brand:                       JVC
# model no. of remote control: RM-V717U
# devices being controlled by this remote: DVP1, DVP3
#

begin remote

  name  RM-V717U
  bits           12
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       2400   600
  one          1200   600
  zero          600   600
  gap          45000
  min_repeat      9
  toggle_bit      3

  frequency    40000
  duty_cycle   33

      begin codes
          record                   0x000000000000099A
      end codes

end remote

begin remote

  name  RM-V717U
  bits            8
  flags SPACE_ENC|NO_HEAD_REP|CONST_LENGTH
  eps            30
  aeps          100

  header       8648  4070
  one           645  1476
  zero          645   422
  ptrail        642
  pre_data_bits   8
  pre_data       0xCB
  gap          46630
  min_repeat      3
  toggle_bit      0


      begin codes
          t                        0x000000000000004A
          w                        0x000000000000008A
          standby                  0x000000000000009A
          display                  0x00000000000000F4
          snapshot                 0x00000000000000BA
          slow_backward            0x00000000000000A0
          slow_forward             0x0000000000000010
          shift_left               0x0000000000000059
          shift_right              0x0000000000000099
          shift_up                 0x00000000000000E9
          shift_down               0x0000000000000019
          fade                     0x000000000000001A
          fast_backward            0x00000000000000E0
          play                     0x0000000000000030
          fast_forward             0x0000000000000060
          effect                   0x000000000000009D
          effect_on/off            0x000000000000001D
          stop                     0x00000000000000C0
          pause                    0x00000000000000B0
          in/out                   0x0000000000000016
          cancel                   0x0000000000000096
          on/off                   0x00000000000000E6
      end codes

end remote


