#
# this config file was automatically generated
# using lirc-0.7.0pre1(act200l) on Mon Dec  9 22:51:14 2002
#
# contributed by 
#
# brand:                       HUMAX
# model no. of remote control: 
# devices being controlled by this remote: VACI-5300
#

begin remote

  name  HUMAX
  bits           16
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       9097  4431
  one           598  1658
  zero          598   520
  ptrail        600
  repeat       9096  2191
  pre_data_bits   16
  pre_data       0x8
  gap          107945
  toggle_bit      0


      begin codes
          1                        0x000000000000C03F
          one                      0x000000000000C03F
          2                        0x00000000000020DF
          two                      0x00000000000020DF
          3                        0x000000000000A05F
          three                    0x000000000000A05F
          4                        0x000000000000609F
          four                     0x000000000000609F
          5                        0x000000000000E01F
          five                     0x000000000000E01F
          6                        0x00000000000010EF
          six                      0x00000000000010EF
          7                        0x000000000000906F
          seven                    0x000000000000906F
          8                        0x00000000000050AF
          eight                    0x00000000000050AF
          9                        0x000000000000D02F
          nine                     0x000000000000D02F
          0                        0x00000000000030CF
          zero                     0x00000000000030CF
          RED                      0x00000000000038C7
          GREEN                    0x000000000000B847
          YELLOW                   0x00000000000058A7
          BLUE                     0x0000000000007887
          WHITE                    0x0000000000009867
          EXIT                     0x0000000000006897
          LEFT                     0x00000000000048B7
          RIGHT                    0x00000000000028D7
          UP                       0x0000000000008877
          DOWN                     0x000000000000A857
          OK                       0x000000000000C837
          MENU                     0x000000000000708F
          V+                       0x000000000000F807
          V-                       0x00000000000002FD
          CH+                      0x00000000000008F7
          CH-                      0x000000000000F00F
          ?                        0x000000000000E817
          RCL                      0x000000000000827D
          EPG                      0x000000000000D827
          ON                       0x00000000000000FF
          OFF                      0x00000000000000FF
          standby                  0x00000000000000FF
      end codes

end remote
