#
# this config file was automatically generated
# using lirc-0.7.0pre1(serial) on Thu Nov 14 18:05:52 2002
#
# contributed by Stefan Hussfeldt <lirc@marvin.on-luebeck.de>
#
# brand:                       Grundig
# model no. of remote control: RP25
# devices being controlled by this remote: VCR GV240VPT (maybe other Grundig VCRs and TVs)
#
# The remotecontrol has three level: Video 1, Video 2 and TV. With this config file
# only Video 1 is recognized.
#

begin remote

  name  RP25
  bits           16
  flags GRUNDIG
  eps            30
  aeps          100

  header        806  2972
  three        1139  2278
  two           583  1806
  one           583  1139
  zero          583   472
  plead        1333
  gap          90000
  min_repeat      1
  toggle_bit      1


      begin codes
          Check                    0x0000000000002A7F
          CL                       0x000000000000267F
          ON/OFF                   0x0000000000002CFF
          VTX-Size                 0x000000000000277F
          VTX-?                    0x00000000000027FF
          VTX-Stop                 0x000000000000287F
          VTX-Info                 0x0000000000002BFF
          Red                      0x0000000000002AFF
          Green                    0x0000000000002B7F
          Yellow                   0x000000000000297F
          Blue                     0x00000000000028FF
          Info                     0x000000000000237F
          VPT                      0x00000000000029FF
          TIP                      0x000000000000067F
          Up                       0x00000000000023FF
          Down                     0x000000000000247F
          Left                     0x00000000000025FF
          Right                    0x000000000000257F
          OK                       0x00000000000024FF
          ACP                      0x0000000000003DFF
          PAL/SEC                  0x0000000000003C7F
          Key                      0x0000000000003E7F
          Code                     0x0000000000003EFF
          FastFwd                  0x00000000000002FF
          FastRew                  0x000000000000037F
          Play                     0x000000000000017F
          Back                     0x000000000000077F
          Pause                    0x00000000000001FF
          Stop                     0x000000000000157F
          Still+                   0x00000000000007FF
          Still-                   0x000000000000087F
          StillFwd                 0x000000000000027F
          StillRew                 0x00000000000009FF
          Record                   0x00000000000000FF
          1                        0x0000000000000AFF
          2                        0x0000000000000B7F
          3                        0x0000000000000BFF
          4                        0x0000000000000C7F
          5                        0x0000000000000CFF
          6                        0x0000000000000D7F
          7                        0x0000000000000DFF
          8                        0x0000000000000E7F
          9                        0x0000000000000EFF
          0                        0x0000000000000A7F
          ProgramUp                0x00000000000013FF
          ProgramDown              0x000000000000147F
#          ProgramOK                0x00000000000024FF
          AC/CV                    0x000000000000107F
          SAT                      0x0000000000000FFF
          Size                     0x00000000000008FF
          Doublearrow              0x00000000000003FF
          Hi-Fi                    0x0000000000000F7F
          Switch                   0x000000000000127F
          LP                       0x000000000000057F
          Count                    0x00000000000014FF
          0000                     0x000000000000137F
          Picture                  0x0000000000003F7F
          PiP                      0x0000000000002C7F
          Power                    0x000000000000007F
      end codes

end remote


