#
# this config file was automatically generated
# using lirc-0.8.0(sir) on Mon May  1 17:24:20 2006
#
# contributed by 
#
# brand:                       Elmo
# model no. of remote control: 
# devices being controlled by this remote: PRC-100S PTZ Camera
#

begin remote

  name  Elmo_PRC-100S
  bits           16
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       8976  4524
  one           564  1685
  zero          564   562
  ptrail        564
  repeat       8978  2274
  pre_data_bits   16
  pre_data       0x4FB
  gap          108014
  toggle_bit      0


      begin codes
          power                    0x807F
          backlight                0x40BF
          reset                    0xC03F
          irisopen                 0x20DF
          focusnear                0x906F
          preset                   0x609F
          id                       0xE01F
          1                        0x50AF
          4                        0xD02F
          irisclose                0x10EF
          focusfar                 0xB04F
          2                        0x708F
          5                        0xF00F
          irisauto                 0x30CF
          focusauto                0x8877
          3                        0x48B7
          6                        0xC837
          tele                     0x18E7
          wide                     0x38C7
          menu                     0x9867
          up                       0x58A7
          left                     0xB847
          right                    0xF807
          down                     0x6897
          home                     0x7887
          cursor                   0xE817
      end codes

end remote


